AC Repair Companies: AC Dos And Don’ts

Heating repair

If you are like other homeowners, you have an air conditioner in your home. For the unit to last for a long time and also give you a great service over the long haul you need to take good care of it. To help you out, here are a few air conditioner dos and don’ts as given by AC repair companies:

Do: Pay attention to the air filter

The air filter determines the quality of air in the air conditioner. Due to its role, the unit accumulates a lot of dust and debris especially when you don’t clean it regularly. A clogged up air conditioner is not only ugly to look at, it also tends to make the air conditioner work harder than it should. The end result is the unit consuming a lot of energy.

For you to keep your cooling costs low, regularly inspect the air filter. If dirty, clean it. In some cases, you might find it to be too dirty or damaged to the extent that you have to replace it.

The location of the air filter defers depending on the brand. You will find the air filter on the air handler, which is found in the basement or in the duct system. Are you having issues locating the air filter? Take a look at the owner’s manual. You can also contact a professional to help you out.

Do: Clean the air conditioner

In addition to cleaning the air filters, you also should clean the entire air conditioner. This includes the indoor and outdoor units. Even if you regularly clean the air filter and don’t pay attention to the rest of the air conditioner, dirt and debris are bound to accumulate making the air conditioner work harder than it should.

At least once a year, take time to clean both the indoor and outdoor units. When cleaning the parts, be cautious when cleaning the coils. You should note that they tend to easily bend; therefore, you should be gentle in your work. If you aren’t sure of how to do it properly, ask a professional to help you out.

Do: Keep an eye on the thermostat

A properly functioning and calibrated thermostat is integral for the proper working of the air conditioner. First things first—invest in a high quality, digital thermostat. While it will be expensive to purchase, it will give you a lot more in return.

These thermostats don’t break. They also tend to work better thus you have better control of your air conditioner. The units are also programmable thus you can program them even when you aren’t in the house.

After investing in a modern thermostat, you should take good care of it. You should inspect it before the cooling season begins and at the end of every year. If you notice a problem, fix it immediately.

Do: Maintain refrigerant levels

Improper refrigerant levels damage the compressor which as you know is the heart of the air conditioner. You should note that when the compressor isn’t working properly, you don’t have an air conditioner. Do you want to have peace of mind that the air conditioner will give you the services you are looking for? Maintain the proper refrigerant levels.

Air conditioning don’ts

One of the things you shouldn’t do is to allow weeds and other obstructions on the outdoor unit. When there are obstructions, the air conditioner doesn’t work as effectively as it should thus the high cooling costs.

You also shouldn’t allow insects and birds to build nests on the outside unit. You can do this by regularly inspecting the unit and getting rid of any nests that might be there.

Don’t use an extension cord to power your air conditioner. Air conditioning companies Huntington report that doing this makes the air conditioners work much harder than they should cooling the house. As a result, you have a high monthly bill. The air conditioner also tends to have a reduced lifespan.

Don’t put the air conditioner on top of bricks or wood. This is because the unit can easily fall and get damaged. For the unit to be sturdy, construct a strong mounting system for it.

This entry was posted in HVAC Repairs and Installation and tagged , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

IEbFh