Furnace Service: 7 Tricks To A Cozy And Safe Home

It’s Decembrrr! The season of twinkling lights, friendly gatherings, mugs of cheer, and extra chaos in the house. As the host, it’s your responsibility to keep your guests warm and cozy.

In addition to hiring a furnace service professional to inspect and tune up your appliance, there are plenty of other things you can do to keep your home cozy and safe. Some of these things include:

Change the HVAC filters

You don’t want your guests sneezing when taking that hot cocoa, do you? To ensure they are breathing in the fresh air, you should change the air filters.

Replacing the filters also increases the efficiency of the appliance, so you have a unit that is functioning at its best while consuming just little energy. This translates to an ultra-low energy bill at the end of the month.

Keep the vents clear

Blocked vents not only lead to poor airflow making the house uncomfortable, but they also make the heating appliance function too hard; hence you have a high energy bill.

At least once a week, go through all the vents and ensure there are no ribbons, wrapping paper, tissue paper, bows, boxes, or any presents blocking the vents.

If they are there, remove them.

Reduce drafts

Cold drafts can make their way under doors and through windows, forcing you to turn up the heat hence increasing your heating bill.

According to the U.S Department of energy, by reducing the drafts in your home, you can save up to 30% of your annual energy usage.

You can avoid drafts by installing draft guards that block the draft and keep heat inside the house. The cool thing is that draft guards are cheap, costing just $10. If you don’t want to spend money on draft guards, you can make yours using a rolled-up towel or blanket.

Seal leaks and cracks

Cracks allow the warm air to leak to the outside; hence the furnace keeps on working to keep the house warm. As you might guess, this translates to a high energy bill at the end of the month.

You should seal all the cracks, whether it’s a leak in the window frame, crack near the chimney, crack in the brick, crack in the wall, or even a small hole where the wires or pipes are installed.

You can hire a professional to seal the leaks, but if you have the skills, go ahead and seal them by yourself with caulking or weather-stripping.

Avoid decorating near the thermostat

Garland and holiday lights are excellent to look at, but you should refrain from hanging them over the thermostat. When you cover the thermostat, you make it hard for it to gauge the actual room temperature hence throwing off how the heating system works.

When the appliance isn’t working correctly, you end up with an uncomfortable house.

Use the backdoor

It’s normal for guests to come in and out of the house more often, especially if you have a large family. The constant coming in and leaving of the guests means your door will be opening and closing, which isn’t healthy for your appliance.

This is because hot air keeps on leaving the house; hence the heating appliance works hard to compensate for the loss. In addition to the appliance consuming a lot of energy, it also reduces the lifespan of the unit.

To keep most of the hot air inside, ask the guests to use the back door that is as furthest from the thermostat as much as possible.

When you keep most of the heat inside the house, you not only prevent the heating appliance from working too hard, you also keep everyone warm, toasty, and happy.

Use the ceiling fan

Many people have the notion that the fan is only effective during summer, but you can also use it in winter to spread the hot air.

You should set the ceiling fan to move in the counterclockwise direction, and you will create a gentle updraft that forces warm air near the ceiling to move down where the guests are.

When using the ceiling fan, furnace repair service Long Island experts advise that you adjust the thermostat. This will prevent the heating appliance from working too hard and, at the same time, save you money.

This entry was posted in HVAC Repairs and Installation and tagged , , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *