Heat pumps are loved by many people as they are energy efficient thus significantly reduce your energy costs. While they are energy efficient, they tend to develop problems just like any other appliances you might be having. Here are some of the most common heat pump problems and how to handle them as given by heat pump repair professionals:
Sudden loss of heat
If your heat pump suddenly stops working, you shouldn’t panic. In most cases, the problem is often as a result of a minor issue that you can easily fix at a small or no fee. Before you do anything, the first thing you should check is the thermostat.
Is the heat pump turned on? If it is, is it set to heat? If it’s not, you should set it.
If you recently replaced the thermostat, the new unit might be the problem. In most cases, the contractor might have installed the wrong unit. The new thermostat might also be wired improperly. When the thermostat is wired improperly, it can fry the electronic components, preventing the heat pump from working as efficiently as it’s supposed to.
If everything about the thermostat checks out, the problem might be due to lack of power. The issue might be brought about by a tripped circuit breaker or bad wiring. All you need to do is to check the circuit breaker box and if it’s the source of the problem, reset it.
It’s common to find the thermostat working properly and the power getting into the appliance as it’s supposed to, but it fails to function properly. In such a case, you should contact an expert who will help you with the fixing of the problem.
Failure of the unit to produce enough heat
If your heat pump is running but failing to warm the house, you might be having dirty air filters or any other parts of the heat pump might be causing the problem. You might be having dirty filters, fans, coils, and other issues that might be reducing airflow through the system.
For you to fix the problem you should inspect the air filter. If dirty, clean it. You also should make a habit of inspecting the air filter at least once every month. If it’s dirty, you should clean it. In some cases, you might find it too dirty or damaged for cleaning. In such a case, you should simply replace it.
In addition to the air filter, you also should clean the other parts of the heat pump. These parts include: outdoor coils, fan, supply, and return registers. You can clean the parts by yourself, but for ideal results, hire a professional to help you out.
The cool thing with working with a professional is that he/she will also inspect the heat pump and fix any issues it might be having.
The heat pump is blowing cold air
The heat pump is supposed to produce hot air that heats up the house; therefore, when it produces cold air, you have a problem. While this is the case, you shouldn’t assume the worst. The heat pumps are designed to produce hot air, but you shouldn’t expect the air to be as hot as the one produced by oil, gas, or forced-air furnaces.
While the air shouldn’t be too hot, if you find it too cold than it should, you should take efforts to find out the source of the problem. The first thing you should do is to set the thermostat at least five degrees above the room temperature.
If still, the warm air isn’t coming, you most likely have a defective thermostat or air handler. Unless you have the necessary skills, you should refrain from trying to fix the appliance by yourself. The best way out is to hire a heat pump repair service Ronkonkoma professional who will help you with the inspection of the unit and fixing it.
The heat pump shouldn’t function in extreme quietness, but when you notice rattling sounds, you have something to be worried about. In most cases, the noises result from loose hardware or out-of-place registers.
You should open up the unit and confirm that the panels are screwed on right. If they aren’t, tighten them.