Heating Service Repair: 6 Obvious Signs It’s Time To Replace Your Furnace

furnace repair

Good quality furnaces don’t come cheap; therefore, many homeowners form strong bonds with their appliances.As a result, they don’t replace them when they should.

This leads to high heating costs. Also, as a homeowner, you are always worried the furnace will grind to a stop in the middle of a cold winter night.

Do you want to keep your home heating costs low and have peace of mind that you can rely on your appliance to keep your house warm? Replace your furnace at the right time. To help you out, here are signs given by heating service repair professionals that it’s time to replace your heating appliance:

The furnace is old

Many homeowners think furnaces should last forever, but this isn’t the case. Furnaces last between 15 and 20 years. After this, you have to replace them to avoid high heating costs. Old appliances also keep on failing.

If you moved into a house with an already installed furnace, it’s hard to tell the age of the appliance. The best way out is to check for the serial number and give it to the manufacturing company.

The company will tell you when the appliance was manufactured. If the appliance has gone past its prime, consider replacing it.

The furnace has become too noisy

While manufacturing companies have strived to reduce the amount of noise furnaces make, you can still hear them when working. Despite this, there are some noises the machine makes that spell trouble. These are:

Rattling noises: When you have these noises, it means you have loose screws, unsecured ductwork, loose sheet metals, or improperly balanced furnace motor. Ask a professional to inspect the appliance and fix the source of the problem.

Humming: It’s normal for the fan motor to make noises when working but if the noise is causing disruptions, you may have to replace the furnace blower motor.

Squealing sounds: Squealing noises come about when the blower motor or inducer is damaged or worn out. The problem can also come about due to a loose bearing, a deteriorating belt, or an issue with the pulley holding the belt.

Popping: Popping noises happen when parts inside the furnace heat and cool in response to temperature changes.

When having any of these noises, find an expert furnace technician to inspect the furnace and fix the problem. If you fix the problem then it comes back after a short while,  highly consider replacing the furnace.

The energy bills keep soaring

Faulty or old appliances function inefficiently. If you notice your energy bills going up every month yet you haven’t installed a new appliance, ask a furnace technician to inspect the unit. Sometimes a simple repair or replacement of a faulty part will get rid of the problem but if the problem keeps on coming back, you don’t have any other way out other than to replace the appliance.

The furnace heats the house unevenly

Was the furnace previously evenly heating all the rooms of the house but it’s no longer doing it? You have a problem in your hands to address.

This problem is common when the furnace is old and not strong enough to evenly distribute heat throughout the house.

New furnaces are more efficient hence evenly distribute heat to all rooms of the house.

Furnace doesn’t cycle properly

It’s normal for the furnace to cycle on and off during normal operation. When the house temperature falls below the one set on the thermostat, the furnace kicks on to raise the temperature. Once the thermostat reaches the target temperature, the furnace turns off.

If the furnace cycles on and off too frequently or seems to run all the time, something is off. Ask an expert to look into the behavior. If the professional fixes it but the problem keeps on coming back, it’s time to think about getting a new appliance.

The furnace keeps on developing problems

Do you keep on repairing the furnace? Do you have the phone number of your local HVAC Companies Ronkonkoma on speed dial? You must be spending a lot of money on furnace repairs. You will be better off simply replacing the appliance.

When buying a new furnace, ensure it’s of high quality. It also should have a high SEER rating.

This entry was posted in HVAC Repairs and Installation and tagged , , , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

Hm64