Many homeowners struggle with high heating bills, not to mention appliances that keep on failing in the middle of the night.
Are you struggling with the same?
What if I told you there are ways you can keep your furnace functioning optimally eliminating the worry of high energy bills or the furnace breaking down unexpectedly? Want to learn how?
Here are tips given by HVAC companies on how to go about it:
Keep the air filters clean
You must have heard this from the contractor who installed your heating system. Cleaning the filters is simple, but highly effective.
The purpose of the furnace filter is to prevent dust, hair, and other debris from getting into the furnace and clogging it.
When you have had your furnace for a long time without cleaning it, leaves, dust, and other materials tend to pack into the filter, making it hard for air to pass through easily.
What is the consequence of this?
Inadequate air gets into the furnace, which puts more stress on the heating unit.
For you to avoid this, make a habit of cleaning the filter as regularly as possible.
The frequency at which you do it depends on whether you have pets, you recently made renovations to your house, you live in a dusty place, and many other things.
The beauty of cleaning the filter is you don’t need to hire a technician to help you out—you can easily do it by yourself.
Sometimes you might find the filter too dirty or damaged for cleaning. In such a case, simply replace it. When getting a replacement, buy a high-quality filter that not only gives you an excellent service, but also lasts for a long time.
Use a programmable thermostat
The thermostat controls the furnace. When the temperature falls below a certain level, it signals the furnace to start working.
While there are many types of thermostats you can buy, the best to go for is the programmable thermostat.
In addition to it being easy to use, it also gives you the ability to control it virtually, for example, you can control it from your place of work.
When you are leaving office, and you want to find a warm house, set the temperature you want, and let the thermostat do its magic.
The only caveat with the programmable thermostat is that it’s expensive. Luckily, heating experts have found it to be highly effective at reducing the heating bill, so you save a lot of money over time.
Furnace technicians also report that the thermostat reduces wear and tear, so your appliance lasts for a long time.
Keep the area around the furnace clear
If you are like other homeowners, you place the furnace in the basement. Unfortunately, this is the same place you store extra belongings such as cartons and unused clothes.
Most homeowners don’t care about the organization of the basement, so they throw things haphazardly.
When there are a lot of items too close to the furnace, air doesn’t circulate freely, which makes the heating unit work too hard.
How can you prevent this?
Reduce the number of things you store in the basement. You also should watch how you place the few things that remain there. A good rule of thumb is to keep a three to five-foot area around the furnace.
This way, you are sure there is enough room for air to get into the furnace. Hence the unit won’t work too hard. It also won’t consume a lot of energy hence hiking your monthly energy bill.
Strategically use the curtains
Curtains are only good at keeping off snooping eyes, right? Wrong. When you are strategic in the way you use the curtains, you can create a massive difference in your monthly energy bill.
To prevent heat loss at night, keep the curtains closed.
During the day, open them on the south or west-facing windows. This is to allow the warm rays of the sun to enter and heat the inside of the house.
As you can see, it’s not hard to keep your furnace functioning optimally. In addition to the above tips, also remember to tune up your appliance at least once a year.
Hire a furnace service Long Island provider to inspect the appliance and fix the problematic parts, and you will have a furnace running at peak performance.