Oil Tank Replacement And Maintenance Tips

If you live in the rural areas or you simply like things staying old school, you most likely have an oil storage tank you use to heat up your home.

When you are installing the pieces, HVAC companies recommend that you place them outside your home underneath the decks or stairs. This is strictly for safety reasons.

When properly maintained, oil storage tanks have a life expectancy of 15-20 years depending on the specific models.

How do you protect the tank from weather elements?

Since you install the tank outside, you should protect it from the tough weather elements. This is because the tank is prone to damage by the elements. For example, in the event there are frost heaves and other changes in the ground, the tank can move making it unstable and more difficult for it to supply the heating fuel.

The cool thing is that there are a number of things you can do to protect your tank from these elements. Some of the things you can do include:

Using weather protection devices such as fill gauge protectors and tank stability brackets.

Getting rid of any tall vegetation or debris surrounding the tank. This is to reduce the chances of the tank rusting or corroding.

Painting the tank with rust-proof paint thus protecting the tank from corrosion. For you to get maximum benefits, coat even the legs and bottom of the tank.

How do you take good care of the tank?

In addition to protecting the tank from the weather elements, you also need to take good care of it. When you take good care of the unit you not only increase the lifespan of the unit, you also increase its efficiency thus you spend less energy keeping your house warm.

The first thing you should do is to ensure that the tank has labels and metals. These make it easy for you and the service technician to know more of what is going on with the tank.

From these things, you will be able to know the gauge or thickness of the tank’s steel construction, the year of manufacture, and many other things.

The labels will also help you in knowing whether the tank was manufactured according to the national standards.

The other thing you should do is to regularly inspect the tank’s interior. During the inspection, be on the lookout for signs of rust or corrosion. Also, check the vent and fill pipes for signs of leaks and spills.

It’s common for water, sludge, and biofilm to accumulate within the oil tank over some time leading to corrosion. This often comes about if the tank isn’t protected by a lining or an anti-corrosion film.

For you to prevent the sludge from accumulating you should make a habit of hiring a technician at least once a year to inspect the tank and clean it. To reduce water buildup in the tank, consider using fuel oil additives.

During the hot months of the year, protect the tank from internal condensation by keeping the tank topped off.

While the internal of the tank is important, so is external. At least once a year, inspect the external of the tank. This calls for you to keep an eye on weld seams, broken base supports, damaged fill gauge, and cross-threaded fittings.

When should you remove the tank?

It’s common to have a tank that you are not using. For example, you might be having two or you might have replaced one without removing the old one. For you to avoid having a cluttered space, you should remove the extra tank. You can remove the tank by yourself or hire a tan service company to help you out.

When should you replace the tank?

If your tank is old, rusting, or showing signs of deterioration, it’s time that you think about replacing it. When you are undertaking oil tank replacement Long Island, avoid tanks that are used or refurbished. This is because they will start leaking within just a short time.

After replacing the tank, don’t transfer the leftover oil from the old tank to the new one. This is because the oil might be containing microorganisms, acids, and other contaminants that might provoke the tank to corrode.

Old tanks have also been shown to contain water and sludge that you can easily pass on to the next tank during the transfer process.

This entry was posted in HVAC Repairs and Installation and tagged , , , , , . Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *

W9jbB