Buying the right size and type of air conditioner isn’t enough—you need to place the unit in the right place. Wondering where to place your air conditioner? Here are valuable air conditioner placement tips you should consider as given by HVAC repair companies:
Have enough space for your outdoor unit
During AC installation, most homeowners focus on the indoor unit and ignore the location of the outdoor unit, which is wrong. A good spot for the outdoor condenser is vital for the proper functioning of the air conditioner.
Air conditioning experts report that the air conditioner works better when the outdoor unit has enough room to operate. As you are installing it, ensure the unit has enough space to take in fresh air and release heat from inside your home.
For best results, leave enough clearance space around the condenser unit that will encourage free flow of fresh air.
During the installation, also ensure the location of the outdoor unit is easily accessible so you can clean it, among other regular maintenance tasks.
Locate the indoor unit away from heat sources
Placing the indoor unit close to heat-producing appliances will make your air conditioner work harder than it should. When the air conditioner senses heat, the thermostat may trigger the air conditioner to start working, which translates to a high energy bill at the end of the month.
To avoid this from happening, keep the indoor unit as far from heat sources as much as possible.
Locate the outdoor unit in a shaded area
An outdoor unit exposed to direct sunlight tends to work harder to provide sufficient cooling of the house. Since the unit is working too hard, it tends to consume a lot of energy, which significantly adds to your monthly bill.
To prevent this from happening, place the outdoor unit in a shaded area. By doing this, you not only keep the appliance functioning optimally, but it also extends the lifespan of the appliance.
Place the condenser unit high enough.
Due to the high density of cold air, the air tends to move towards the bottom of the room. To adequately cool your house, you need to consider this factor when installing your new air conditioning system.
When you place the unit too close to the ground, the unit might not properly cool the house leading to a high energy bill. For effective cooling, keep the AC unit high enough. For best results, place the air conditioner 5 to 6 feet above the ground. From this position, the air conditioner will effectively and evenly distribute cold air throughout the house.
As you are positioning the indoor unit, also think about cleaning and replacing the air filters. The location should be easy to access so you can easily reach and replace the filters.
Place the outdoor unit on a flat surface.
You must ensure the outdoor unit is on a flat surface. If the unit is not on a flat surface, it might vibrate excessively, leading to coolant leakage, breakage of copper wires, and compressor damage. The vibrations might also be too loud to disturb your neighbors or even prevent you from sleeping properly.
Installing a split air conditioner? Maintain the right distance between the indoor and outdoor unit
To understand the importance of maintaining the right distance between the indoor and outdoor unit, you need to understand how the split air conditioner works.
The coolant, at low temperatures, flows inside the copper tubes between the indoor and outdoor units. As the refrigerant flows between the units, it loses some cooling effect.
To reduce this loss, keep the distance between the indoor and outdoor units as minimum as possible. For best results, ensure the distance between the two is no more than 15 meters.
Over to you
These are tips on how to install your air conditioner properly. For peace of mind, the air conditioner will be properly installed, have it installed by an expert air conditioner repair services Huntington provider.
After installing the unit, take good care of the unit, so it lasts for a long time and consumes little energy. This calls for you to clean or replace the air filters regularly. You also should routinely inspect the unit and fix any issues you come across.