One of the primary reasons homeowners install heat pumps is because they want to heat their homes efficiently. As a responsible homeowner, you would want to run your heat pump in the best way possible, right?
What is the best way to run a heat pump? If you are wondering this, you should know that there are plenty of ways to go about it, with the common ones being:
Keep the settings low
Heat pump repair professionals recommend keeping the heat pump setting at 18ºC or – 20ºC. Setting the heat pump to the highest setting when it gets cold can be tempting, but you shouldn’t, as the unit won’t heat the room any quicker.
Set your unit to operate at a low temperature, but if you have to raise or lower it, don’t immediately do it as the unit will spend more energy than it should, and it won’t give you the heat you are looking for.
To have an easier time, program the appliance to turn on at least 15 minutes before you get home, so you find a warm, cozy house.
Don’t leave your heat pump running the entire day.
As much as you want a comfortable house, don’t leave your heating system running the entire day. This is because even if your heat pump is advanced, it will underperform and prematurely fail.
The best way to go about it is to use your heat pump’s timer. In winter, set your heat pump to turn on before you get in the morning, so you wake up to a warm and toasty house. You should also set it to come on just before you get home in the evening so that you come home to a warm, comfortable house.
To save money and have an easier time running your unit, align the setting with your daily routine. Luckily there are plenty of resources you can use to learn how to do it.
Place the heat pump appropriately.
How you place, the heat pump goes a long way towards determining how effectively it functions. For an easier time, work with an experienced professional that knows what they are doing.
When installing the heat pump, two of the important factors to consider are the size of the heat pump and where you place it.
Of course, you should ensure that the heating system you install matches the size of your house as if your appliance is too small, it will work too hard to heat your house to your desired temperature. This puts a lot of strain on the heat pump it goes to an early grave.
On the other hand, if your heat pump is too large for your house, it will function inefficiently, so you have to keep switching it off to stop it from overheating.
When it comes to placement, you should think about how people use the spaces you are looking to heat. As a rule of thumb, don’t’ put the appliance close to the space where people are sitting, such as directly facing the couch.
You also should consider the airflow throughout the house. If you install the unit facing the hallway or doors to other rooms, you stand to benefit from heat flowing into these rooms.
If you want to hide the ducts, go with ducted heat pumps that hide the roof cavity’s main system and pump the warm air into the various rooms.
Don’t heat too many rooms at once
Although many heat pumps are capable of heating multiple rooms at once, avoid doing it as it sometimes takes longer than it should.
To save some energy, heat pump repair service Long Beach recommends you section off your house, so you focus on the key “hot spots” you want to keep warm and cozy at different times of the day.
For example, in the morning, you can heat the kitchen and bedroom while in the evening, shut off the bedrooms and dial up the heat in the family room.